25 No new routing protocols are available for installation.
26 The router service is stopped on the selected machine.\n\nDo you want to start the router service?
27 No new router-managers are available for installation
28 No new LAN adapters are available for installation.
29 No new router interfaces are available for addition.
30 Please select at least one row.
31 Click the network adapter that you want to add, then click OK.
32 Click the interface that you want to enable the routing manager on, then click OK.
33 Click the interface that you want to enable the routing protocol on, then click OK.
34 Click the routing manager that you want to add, then click OK.
35 Click the routing protocol that you want to add, then click OK.
36 &Network adapters:
37 &Interfaces:
38 &Routing managers:
39 &Routing protocols:
40 Check the router-managers that you want to enable on the interface, then click OK.
41 Check the routing-protocols that you want to enable on the interface, then click OK.
42 Select Network Adapter
43 Select Interface
44 Select Routing Manager
45 Select Routing Protocol
46 Select Routing Managers
47 Select Routing Protocols
48 %1 was not added successfully; continue with configuration?
49 Please select at least one column.
50 Scale: 1:%1
51 Unknown
52 Client
53 Home router
54 Demand-dial
55 Internal
56 Dedicated
57 Non-operational
58 Disconnected
59 Calling back
60 Listening
61 Authenticating
62 Authenticated
63 Initializing
64 Unknown
65 You have selected IPX, which will require you to configure the following protocols:\n%1\nDo you still wish to add IPX on the interface?
66 Select Interface for %1
67 %1 second(s) elapsed
68 Waiting for service to start...
69 Waiting for service to stop...
70 %1 second(s)
71 The interface is disconnected.
72 Connecting
73 Disconnected
74 Connected
75 An error occurred while connecting the interface..\n%1
100 General
32776 Monitor selected row
32777 Update the displayed information
32778 Show details for selected information
32779 Update displayed information
32780 Changes protocol configuration
32781 Show details for selected interface
32782 Update the displayed information
32783 Change interface configuration
32784 Updates auto-static routes
32785 Updates the displayed information
32786 Changes options for the selected interface
32787 Shows details for the selected interface
32788 Shows details for selected interface
32789 Updates displayed information
32790 Changes configuration of selected interface
32791 Shows detailed routing information
32792 Updates displayed information
32793 Adds a new static route
32794 Edits the selected static route
32795 Removes the selected static route
32796 Shows detailed filter information
32797 Add a new filter-set
32798 Edits the selected filter-set
32799 Removes the selected filter-set
32800 Adds a new static route
32801 Adds a new filter-set
32802 Neighbor count
32803 RIP Neighbors
32804 Address
32805 Version
32806 Bad packets
32807 Bad routes
32808 OSPF Areas
32809 Up
32810 Down
32811 Area ID
32812 State
32813 SPF computations
32814 Routing protocol
32815 Preference level
32816 The neighbor specified is already listed.\nPlease enter a unique address for the neighbor to be added.
32817 Any interfaces configured for the selected areas must be reconfigured before the areas are deleted.\n\nAre you sure you want to delete the selected areas?
32818 An unknown error occurred.
32819 An error occurred while refreshing the display: %1
32820 IP Datagrams Received
32821 IP Datagrams Forwarded
32822 IP Routes
32823 UDP Datagrams Received
32824 UDP Datagrams Sent
32825 TCP Connect-attempts Failed
32826 TCP Connections
32827 TCP Connections Reset
32828 ICMP Messages Received
32829 ICMP Messages Sent
32830 Area
32831 Static Routes
32832 SNMP Set Routes
32833 Protocol %1
32834 Loading interfaces...
32835 Loading interface configuration...
32836 Ready
32837 Loading interface statistics...
32838 Beginning refresh...
32839 TCP/IP Information
32840 Device type
32841 Please add one or more interfaces before creating static routes.
32842 Please select an interface of type 'Full router' for updating routes.
32843 An error occurred while updating routes: %1
32844 Administrative status
32845 Operational status
32846 Unreachable
32847 Disconnected
32848 Connecting
32849 Connected
32850 Operational
32851 IP Addresses
32852 Address
32853 Network mask
32854 Index
32855 Broadcast address
32856 UDP ports
32857 Local address
32858 Local port
32859 Address
32860 Index
32861 Type
32862 Physical address
32863 IP Address Translations
32864 Other
32865 Invalid
32866 Dynamic
32867 Static
32868 DHCP Relay Agent Configuration - %s
32869 DHCP Relay Agent
32870 Relay mode
32871 Send failures
32872 Receive failures
32873 Requests received
32874 Requests discarded
32875 Replies received
32876 Replies discarded
32877 DHCP Relay Agent Configuration
32878 DHCP Relay Agent Client Configuration
32879 Area 0.0.0.0 is the backbone area and is required for virtual interfaces to operate correctly.\nPlease delete all virtual interfaces before deleting the backbone area.
32880 &Enable OSPF on this IP address
32881 &Enable OSPF for dial-in clients
32882 The area with ID 0.0.0.0 is the backbone area and cannot be a stub area.
32883 An area other than the backbone must be configured before virtual interfaces can be added.
32884 Address
32885 Mask
32886 Protocol
32887 Other
32888 Network Management
32889 Local
32890 ICMP
32891 EGP
32892 GGP
32893 Hello
32894 RIP
32895 IS IS
32896 ES IS
32897 Cisco
32898 BBN
32899 OSPF
32900 BGP
32901 Summary
32902 This area has virtual interfaces and cannot be a stub area.\nPlease remove any virtual interfaces which use this area as a transit area\nbefore changing this area to a stub area
32903 There are no areas configured which can be used as transit areas.\nPlease add one or more non-stub, non-backbone areas before proceeding.
32904 NBMA
32905 Virtual
32906 Dynamic
32907 Sequence
32908 The route entered is a duplicate.\nPlease enter a unique route.
32909 No DHCP servers have been added to the DHCP relay agent.\nDo you wish to continue without adding any servers?
32910 Neighbor ID
32911 All interfaces for this area (%1) must be reconfigured for another area or deleted before this area can be removed.
57344 Routing And RAS Administrator
61204 General
61205 OSPF by Bay Networks
61206 Monitoring
61207 IP Routing
61208 Virtual Interfaces
61209 RIP for Internet Protocol
61210 Interface
61211 IP
61212 Input filters
61213 Output filters
61214 Neighbor list
61215 Static Routes
61216 Filters
61217 The router service is stopped on the selected machine.\n\nDo you want to start the router service?
61223 ICMP input errors
61224 ICMP incoming destination-unreachable
61225 ICMP incoming time-exceeded
61226 ICMP incoming parameter problem
61227 ICMP incoming source quench
61228 ICMP incoming redirects
61229 ICMP incoming echos
61230 ICMP incoming echo-replies
61231 ICMP incoming timestamps
61232 ICMP incoming timestamp replies
61233 ICMP incoming address masks
61234 ICMP incoming address mask replies
61235 Received
61236 Sent
61238 UDP no-port datagrams
61239 UDP receive errors
61241 UDP statistics
61242 TCP connections
61243 Local address
61244 Local port
61245 Remote address
61246 Remote port
61247 CLOSED
61248 LISTEN
61249 SYN_SENT
61250 SYN_RECEIVED
61251 ESTABLISHED
61252 FIN_WAIT_1
61253 FIN_WAIT_2
61254 CLOSE_WAIT
61255 LAST_ACK
61256 TIME_WAIT
61257 DELETE_TCB
61258 CLOSING
61260 State
61261 TCP statistics
61262 TCP active opens
61263 TCP passive opens
61267 TCP segments received
61268 TCP segments sent
61269 TCP segments retransmitted
61270 IP statistics
61272 IP incoming header errors
61273 IP incoming address errors
61275 IP incoming unknown protocols
61276 IP incoming packets discarded
61277 IP incoming packets delivered
61278 IP output requests
61279 IP routing discards
61280 IP outgoing packets discarded
61281 IP unroutable ougoing packets
61282 IP packets requiring reassembly
61283 IP packets reassembled
61284 IP packets failing reassembly
61285 IP datagrams fragmented
61286 IP datagrams failing fragmentation
61287 IP fragments created
61288 IP routing table
61289 Destination
61290 Network mask
61291 Gateway
61292 Interface
61293 Metric
61294 Disable neighbor-list
61295 Accept from listed neighbors
61296 Reject from listed neighbors
61297 RIP global counters
61298 System route changes
61299 Total responses sent
61300 RIP for Internet Protocol Configuration
61301 Type
61302 Number of routes
61303 ICMP output errors
61304 ICMP outgoing destination-unreachable
61305 Details
61306 Last refresh
61307 ICMP outgoing time-exceeded
61308 The router is stopped.
61309 %I:%M:%S %p
61310 None
61316 Incoming bytes
61317 Outgoing bytes
61324 Received updates
61325 Sent updates
61326 IP statistics - %s
61327 Admin. status
61328 Operational status
61329 Up
61330 Down
61331 Testing
61333 Unicasts received
61334 Non-unicasts received
61335 Receives discarded
61336 Receive errors
61337 Unknown protocol receives
61338 Non-operational
61339 Unicasts sent
61340 Non-unicasts sent
61341 Sends discarded
61342 Send errors
61343 Send queue length
61344 Send failures
61345 Receive failures
61346 Requests sent
61347 Requests received
61348 Responses received
61349 Responses sent
61350 Bad response packets
61351 Bad response entries
61352 Triggered-updates sent
61353 RIP statistics - %s
61354 IP interface statistics
61355 RIP interface statistics
61356 Update mode
61357 Periodic
61358 Auto-static
61360 Destination
61361 Network mask
61362 Gateway
61363 Metric
61364 Interface
61365 Enabled
61366 Disabled
61367 Filter
61368 ICMP incoming time-exceeded
61369 Default action
61370 Exceptions
61371 Forward
61372 Drop
61373 No OSPF areas were found.\nPlease create at least one OSPF area.
61374 ICMP outgoing parameter problem
61375 Periodic update mode
61376 Auto-static update mode
61377 RIP version 1 only
61378 RIP version 2 only
61379 RIP version 1 and 2
61380 RIP version 1 broadcast
61381 RIP version 2 broadcast
61382 RIP version 2 multicast
61383 Silent RIP
61384 Ignore incoming packets
61385 When accepting routes
61386 When announcing routes
61387 From
61388 To
61389 RIP Configuration - %s
61390 Router ID
61391 AS border router
61392 Area count
61393 Virtual interface count
61394 State
61395 Link-state database count
61396 Dynamic neighbor count
61398 Received packets
61399 Sent packets
61400 State
61401 Broadcast
61402 NBMA
61403 Point-to-point
61405 Version
61406 OSPF Configuration
61407 OSPF Area Configuration
61408 OSPF Virtual Interface Configuration
61409 OSPF Configuration - %s
61410 Transit area
61411 Virtual neighbor
61412 An area with the selected ID already exists.\nPlease change the area ID before continuing..
61413 Address
61414 Mask
61415 There is no backbone area configured for OSPF.\nPlease configure the backbone area before adding virtual interfaces.\nThe backbone area is the area with ID 0.0.0.0.
61416 Address
61417 Priority
61418 Please enter an ID for this OSPF router.
61419 Please enter an ID for this OSPF area.
61420 Please enter the address for the OSPF range.
61421 Please enter the mask for the OSPF range.
61422 Please enter an ID for the neighboring router.
61423 Please enter the address for the NBMA neighbor.
61424 Please enter the address for the router to be added.
61425 Please enter the address to be used as a replacement.
61426 Please enter the starting address in the range of addresses to be filtered.
61427 Please enter the last address in the range of addresses to be filtered.
61428 The range entered is not valid.\nThe starting address in the range must be lower than the last address in the range.
61429 Please enter the address for the RIP neighbor.
61430 Please enter the destination address for the route.
61431 Please enter the gateway address for the route.
61432 Please enter the network mask for the route
61433 The network mask entered is not valid.\nThe destination address cannot be more specific than the network mask.
61434 The network mask entered is not valid.\nThe network address cannot be more specific than the network mask.
61435 IP Configuration - %s
61436 IP Configuration
61437 (None)
61438 Please enter the address for the DHCP server.
61439 Not yet implemented.
61440 Are you sure you want to remove the selected interface?
61441 IP Client Configuration
61442 RIP Client Configuration
61443 OSPF Client Configuration
61444 Up
61445 Down
61446 Initializing
61447 Not present
61448 IP statistics
61449 TCP statistics
61450 UDP statistics
61451 ICMP statistics
61452 TCP connections
61453 IP routes
61454 Description
61455 Down
61456 Loopback
61457 Waiting
61458 Designated-router
61459 Backup designated-router
61460 Other
61461 OSPF Link State Database
61462 Area ID
61463 Type
61464 Link state ID
61465 Advertising router
61466 Age
61467 Router
61468 Network
61469 Summary (Network)
61470 Summary (ASBR)
61471 AS External
61472 Stub
61473 TCP/IP
61474 Dropped packets
61475 ICMP outgoing source quench
61476 ICMP outgoing redirects
61477 ICMP outgoing echos
61478 ICMP outgoing echo-replies
61479 ICMP outgoing timestamps
61480 ICMP outgoing timestamp replies
61481 ICMP outgoing address masks
61482 ICMP outgoing address mask replies
61483 This router is configured to be an autonomous system boundary router,\nwhich means it cannot be part of a stub area.\nPlease disable the AS boundary setting before configuring the stub area.
61484 There are more than two areas, but there is no backbone area.\nThe backbone area has area ID 0.0.0.0.\nPlease configure a backbone area before continuing.
61485 RAS Server Interface
61486 Internal Loopback Interface
61487 IP Address
61488 Not available
61489 Please select a transit area. If there are no transit areas, you will need to create one.
